Replacement
CAUTION:
Lifting hazard: The PTP assembly weighs 8.16 Kg (18 lbs). Be careful when installing
the PTP assembly. Follow the directions in
Array damage: Be sure to position the PTP array as shown below or you might
damage it.
1. Move the PTP array to the middle of the PTP frame.
2. Insert the PTP assembly straight down into its position in the PTP frame.
3. At the PTP assembly, insert the eight 6 x 32 (T-15) screws that attach the PTP assembly to the tops
of the libraries.
4. Attach the PMJ connector at the PTP assembly.
95846
"Lifting Techniques" on page
1. Array position
C65403
1. PMJ
1
C65417
Fourteenth Edition
StorageTek Proprietary
Pass-thru Port (PTP)
xxv.
5-139