4. Make sure the card latch engages upward.
5. Using a flat-bladed screwdriver, tighten the captive screw.
3
Note: The library must be at the end of the SCSI bus and you must use a single, shielded cable.
6. Replace the SCSI cable plus the pass through terminator.
7. Return the system to operation. See
95846
1. MPW card
2. MPW card latch
3. Captive screw
1
2
C65314
1. MPC card
2. MPW card
1
3. SCSI cable (shown with terminator)
2
3
C65313
"Restoring Library Operation" on page
Fourteenth Edition
StorageTek Proprietary
Logic Cards
5-140.
5-55