Removal
1. Review the information under
2. Release the two Y cable clamps.
3. Remove the cable connector attaching the Y cable to the MPC/MPCL card. Make sure to note
whether the connector was removed from the single-ended or differential jack.
4
4. Using a 3/16-in. hex driver, remove the four jackscrews on the left side of the bulkhead from the Y
cable connectors.
5. Remove the Y cable.
1
1
95846
"Preparation" on page
5-1.
1. Differential jack
2. Cable clamps
1
3. Library Y cable
4. Single-ended jack
2
3
E65217
1. Jackscrews
C65178
Fourteenth Edition
StorageTek Proprietary
Library SCSI Y Cable
5-21