Hand-Camera Assembly; Removal; Figure 5-6. Hand-Camera Assembly - StorageTek L700 Service Manual

Hand-Camera Assembly

Hand-Camera Assembly
Figure 5-6. Hand-Camera Assembly (C65105)

Removal

CAUTION:
Possible equipment damage: You will need the hand-camera assembly
shipping pin that was shipped with the tape library to replace the hand-
camera. The pin should have been left inside the tape library after it was
installed.
If the shipping pin is not available, be sure to hold the Z belt when
removing the hand-camera assembly. The Z carriage will be damaged if it
is not held in place.
5-14 Fourteenth Edition
StorageTek Proprietary
C65105
95846