StorageTek L700 Service Manual page 248

Tape Drive Components
6. Grip the rear of the drive and, while pulling it toward you, place your other hand under the drive
tray for support.
7. Using both hands, remove the drive tray assembly from the slot, and place it on a flat, stable surface.
8. Using a Torx T-15 driver, remove the five power supply cover screws.
1
9. Remove the power connector, TTI cable, and SCSI cable from the drive.
1 2
5-108
1. Power supply cover screws
C65360
1. Power connector
2. TTI cable
3. SCSI cable
3
C65361
Fourteenth Edition
StorageTek Proprietary
95846