Rack Cooling; Apc Power Backup System; Table 1-5. Rack Cooling Conversion Bills; Table 1-6. Redundant Ac Power Option Conversion Bills - StorageTek L700 Service Manual

Rack Cooling

Depending on the type and amount of equipment in the rack area, a cooling unit may be
required. The decision is based upon the charts in the L700 Tape Library Systems Assurance
Guide, part MT5008.
A cooling unit is required if you are installing the American Power Conversion (APC)
redundant AC power option.
Conversion bill numbers for the cooling unit, are listed below.
Note: A separate power cable must also be ordered for the cooling unit.

Table 1-5. Rack Cooling Conversion Bills

Conversion Bill
101323
101323
101324

APC Power Backup System

The APC redundant AC power option consists of two batteries, a power monitor switch,
and power strip. If this system is installed in the library, a cooling feature (mentioned
above) is also required.
Conversion bill numbers for the redundant AC power option are listed below.

Table 1-6. Redundant AC Power Option Conversion Bills

Conversion Bill
101410
101411
Note:
1. This bundle includes L5-30 (locking, 120 VAC, 30 A) plugs. The customer
must provide two L5-30R receptacles.
2. This bundle includes Hubbell 316P6W plugs. The customer must provide two
Hubbell 316R6W receptacles.
95846
Description
Domestic fan, rack cooling area
Japan fan, rack cooling area
International fan, rack cooling area
Description
Domestic rack mounted APC bundle. (See note 1.)
International rack mounted APC bundle.
(See note 2.
Fourteenth Edition
StorageTek Proprietary
13U Rack Area
1-7