Replacement - StorageTek L700 Service Manual

Theta Motor

Replacement

1. Note the alignment of the encoder to the arrow mark on the base and, using a Torx T-15 driver,
attach the theta motor to the bracket.
1
2
1
2. Using a Torx T-15 driver, attach the three screws from the theta motor bracket to the roof.
2
5-122
1. Theta encoder
2. Arrow mark
3. Base
3
E65197
1. Screw (4X)
E65198
1. Rear theta motor assembly screw
2. Forward theta motor assembly screws
1
E65037
Fourteenth Edition
StorageTek Proprietary
95846