Setting The Subnet Mask Address - StorageTek L700 Service Manual

Operator Panel Entry
An editing screen appears.
3. On the editing screen:
a. Press the up and down arrow buttons to select a value for each three-digit field in
b. Press the
c. Press the
4. Press the
desired setting to save the changes. (You may press the
most field to abort.)
5. If you have already changed the library's SCSI ID or Port 0 address and are planning
to exit the Main Configuration Menu at this time, you must press the
If you wish to set other configuration values, continue with the next section.
If you have not changed the library's SCSI ID or Port 0 address and are not setting
other configuration values, press the

Setting the Subnet Mask Address

This is a four-byte notation (specified by the system administrator) to resolve routing
within the customer's intranet. This address makes the library accessible through a subnet
on a large network. An example of a subnet mask entry is 255.255.254.0.
To set the subnet mask address:
1. At the Network Config Menu, press an arrow button until the cursor underscores
SUBNET MASK.
2. Press the
3. On the editing screen:
a. Press the up and down arrow buttons to select a value for each three-digit field in
b. Press the
c. Press the
4. Press the
desired setting to save the changes. (You may press the
most field to abort.)
5. If you have already changed the library's SCSI ID or Port 0 address and are planning
to exit the Main Configuration Menu at this time, you must press the
If you wish to set other configuration values, continue with the next section.
If you have not changed the library's SCSI ID or Port 0 address and are not setting
other configuration values, press the
2-34
the address.
button to move right to the next field.
SELECT
button to move left to the previous field.
MENU
button from the right-most field to when the screen displays your
SELECT
button. An editing screen appears.
SELECT
the address.
button to move right to the next field.
SELECT
button to move left to the previous field.
MENU
button from the right-most field when the screen displays your
SELECT
Fourteenth Edition
StorageTek Proprietary
MENU
button until you exit all menus.
MENU
MENU
button until you exit all menus.
MENU
button from the left-
button.
RESET
button from the left-
button.
RESET
95846