9. Insert a screwdriver into the three access holes in the CPCI module and remove the mounting
screws from the standoffs, as shown in the figure below.
4
3
CAUTION:
Possible equipment damage: Pull the CPCI module straight out, being careful not to
damage the connector on the MPC/MPCL card.
10. Pull out the MPV card and CPCI module.
11. Place the CPCI module on a flat surface and remove the six MPV mounting screws and the MPV
card.
1
95846
1. Mounting screw
2. CPCI module
1
3. CPCI access holes for mounting screws
4. MPC/MPCL card
2
C65280
1. CPCI module
2. MPV mounting screw (6X)
2
C65281
Fourteenth Edition
StorageTek Proprietary
Logic Cards
5-47