4. Insert the three CPCI mounting screws through the three access holes in the MPV cover and attach
the module to the three standoffs (as shown below).
4
3
CAUTION:
Possible ESD damage: Follow ESD precautions when handling the MPU card.
Fiber safety: The optical Fibre Channel circuit (MPU card) contains a laser system
(GBIC Module) that is classified as a Class 1 laser product. Refer to
Optic, and ESD" on page xxv
5. Hold the MPU or MPW (MPC card only) card so that the card connector aligns with the MPV card
connector (circuit side out, components facing the MPC/MPCL card).
1
95846
1. Mounting screw
2. CPCI module
1
3. CPCI access holes for mounting screw
4. MPC card
2
C65280
for compliance information and safety precautions.
CAUTION:
Only the lower slot is supported at this
time. Be sure to insert the MPU card
into that slot.
1. Alignment groove
C65332
Fourteenth Edition
StorageTek Proprietary
Logic Cards
"Safety, Fiber
5-49