Starting Snmp; Table B-1. Snmp Default Settings - StorageTek L700 Service Manual

The library comes configured with some default settings, listed in

Table B-1. SNMP Default Settings

Setting
Port ID
Community String
Grace Period
Trap Recipient List
SNMP (agent)

Starting SNMP

To start SNMP for the library, you need to:
1. Configure the library:
a. Enable the agent
b. Add recipients to the trap list (if needed)
c. Make any optional changes to the default settings
2. Re-IPL the library for the changes to take effect.
95846
Default Description
Valid port IDs are 161, and 1024 to 65535
161
Agent community string. When set to public,
requests coming from any community string
public
will be accepted.
1 to 5 minutes
Once you enter the password, you have 1-5
5 minutes
minutes to
This list supports up to 12 recipients with
Empty
no duplicate entries.
Enabled or Disabled
Disabled
Fourteenth Edition
StorageTek Proprietary
Starting SNMP
Table B-1:
any values for the agent.
Set
B-7