CAUTION:
System Degradation: Make sure that the library and associated drives
are offline to the system before starting configuration.
Configuration Tables
Fill in the tables below with the options you selected for the library and drive
configurations.
Table 2-5. Library/Network Configuration Record
Configuration Option
Auto Clean enabled or disabled
T9840 cleaning cartridge warning
count
T9940 cleaning cartridge warning
count
DLT cleaning cartridge warning
count
Hewlett Packard Ultrium cleaning
cartridge warning count
IBM Ultrium cleaning cartridge
warning count
Seagate Ultrium cleaning cartridge
warning count
Date
Ethernet address
Fast Load enabled or disabled
IP address
Library capacity
Library name
Library SCSI ID
Library SCSI type
Library Worldwide ID
Network gateway address
Pass-thru Port
Port 0 Address (library)
95846
Selection
Not configurable: pre-set at the factory
Automatically configured during IPL
Automatically configured during IPL
Not configurable: pre-set at the factory
Automatically configured during IPL.
Libraries connected with a PTP will
display L700E on the operator panel.
Fourteenth Edition
StorageTek Proprietary
Operator Panel Entry
2-21