Connecting The Service Jig - Konica Minolta bizhub C250P Service Manual

Hide thumbs Also See for bizhub C250P:

Table of Contents

8. Service Jig

Connecting the Service jig

1. Using a DTP32 cross-cable, con-

nect the I/O port of the X-Rite to port

B of the selector.

2. Using the RS232 straight cable (2),

connect the COM 1 port of the com-

puter to port C on the selector.

• When connecting to the COM2 port,

set the External Panel Controller

port setting to COM2.

3. Using a cross-cable, connect port A

of the selector to the printer.

4038F2C583DA

Field Service Ver. 2.0 Mar. 2006

Show Quick Links

Table of Contents