6. Periodical check
[3]
38
3. Tilt the Imaging Unit [3] to the left
and shake it a small stroke in the tilt
direction twice. Then, tilt it to the
right and shake it a small stroke in
the tilt direction twice.
4038F2C534DA
4. Remove the Caps [4] on the end of
the Imaging Unit and the bottom
packing material.
[4]
4038F2C535DA
5. Keeping the Imaging Unit [5] in a
level position, insert the Imaging Unit
[5] into the mounting position all the
way until it is stopped.
NOTE
• Install them by fitting the blue label
position of Imaging Unit and one of
the machine.
[5]
• Do not allow the Imaging Unit to
become tilted while installing them
into the Main Unit, as damage to the
PC Drum can result.
4038F2C536DA
Field Service Ver. 2.0 Mar. 2006