21. Mechanical adjustment
21. Mechanical adjustment
21.1 Mechanical adjustment of the bypass tray section
21.1.1
Adjustment of the Bypass Paper Size Unit
This adjustment must be made in the following case:
• The Bypass Paper Size Unit has been removed.
[1]
[2]
[2]
[2]
[3]
284
1. Install the gear so that the protrusion
[3]
of the gear [1] and the mark [3] on
the Bypass Guide Rack Gear [2] are
aligned in a straight line.
[3]
4038F3C003DA
[1]
2. Install the Bypass Unit Cover so that
part A (edge) [2] of the Rack Gear [1]
for the Bypass Paper Size Unit and
part B [3] of the Bypass Unit Cover
are aligned in a straight line.
4038F3C004DB
Field Service Ver. 2.0 Mar. 2006