Konica Minolta bizhub C250P Service Manual page 192

Field Service Ver. 2.0 Mar. 2006
(4) Bind Direction
1
Functions • To set the binding direction during duplex printing when not specified by the printer
driver during PC printing.
Use • To use when binding direction cannot be specified by the printer driver during printing
by Windows DOS, etc.
Setting/ • The default setting is Left Bind.
Procedure
(5) Staple
Functions • To set whether to staple or not when not specified by the printer driver during PC
printing.
Use • To use hen staple is not specified by the printer driver during printing by the Windows
DOS, etc.
Setting/ • The default setting is OFF.
Procedure
(6) Punch
Functions • To select whether to make punch-holes or not when not specified by the printer driver
during PC printing.
Use • To use when the printer driver cannot specify punching during printing from Windows
DOS, etc.
Setting/ • The default setting is OFF.
Procedure
(7) # of Sets
Functions • To set the number to be printed when not specified by the printer driver during PC
printing.
Use • To use when the number cannot be specified by the printer driver during printing from
Windows DOS, etc.
Setting/ • The default setting is 1.
Procedure
(8) Paper Size
Functions • To set the paper size when not specified by the printer diver during printing.
Use • To use when the paper size cannot be specified by the printer driver during printing
from Windows DOS, etc.
Setting/ • The default setting is A4.
Procedure
Top Bind
1 Position 2 Positions
ON
"1" (1 to 999)
14. User Setting
"Left Bind"
"OFF"
"OFF"
151