Replacing The Bypass Tray Separation Roller Assy - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006
[8]
6.5.4

Replacing the Bypass Tray Separation Roller Assy

[2]
[4]
6. Remove the Bypass Tray Feed Roller
[8].
7. To reinstall, reverse the order of
removal.
8. Select [Service Mode] → [Counter]
→ [Life] of the Jig software and clear
the count of [Manual Tray].
NOTE
• Replace the Bypass Tray Feed
Roller and the Bypass Separation
Roller Assy at the same time.
4038F2C008DB
1. Remove the Multi Bypass Unit.
See P.100
2. Remove the Screw [1], and remove
the Ground terminal [2].
[1]
4038F2C009DA
3. Remove the Screw [3], and remove
the Bypass Paper Separation Roller
Assy [4].
[3]
4038F2C010DA
6. Periodical check
21