Power Save - Konica Minolta bizhub C250P Service Manual

14. User Setting
C. Auto Reset
Functions • To set the period of time until Auto Reset starts.
Use • To change the period of time until Auto Reset starts functioning.
Setting/ • The default setting is 1 min.
Procedure
D. Date/Time
Functions • To set the date/time and the time zone to start the clock.
Use • To change settings concerning the date/time.
• This setting should be carried out for set up.
Setting/ • For time zone, set the time difference with the world standard time.
Procedure • Setting range for the time zone: -12:00 to +12:00 (by 30 minutes)
E. Set Date (Adjusting)
Functions • Synchronize the time of the Machine and that of the Server.
• The time is displayed only when the time correction setting (SNTP setting) of the
Administrator setting is "ON."
Use • To synchronize the time of the Machine and that of the Server.
Setting/ • Pressing the Menu/Select key will correct the time.
Procedure
14.2.3

Power Save

A. Low Power
Functions • To set the time until Low Power starts operating after the last key operation has been
completed.
• Low Power: To turn LED and LCD OFF, and lower the power consumption.
Use • To change the time until Low Power starts.
Setting/ • The default setting is 10 min.
Procedure
B. Sleep Mode
Functions • To set the time until Sleep Mode starts operating after the last key operation has
been completed.
• Turn all lines OFF except 5 V line for Control.
• "OFF" will only be displayed when "No Sleep" in Service Mode is set.
Use • To change the time until the Sleep Mode starts.
Setting/ • The default setting is 15 min.
Procedure
148
Field Service Ver. 2.0 Mar. 2006
"1 min." (1 to 9, OFF)
"10 min." (10 to 240)
"15 min." (15 to 240) / OFF