Konica Minolta bizhub C250P Service Manual page 196

Field Service Ver. 2.0 Mar. 2006
(2) Symbol Set
Functions • To set the Font Symbol Set when not specified by the printer driver during PC print-
ing.
Use • To use when the Font Symbol Set cannot be specified by the printer driver during
printing from Windows DOS, etc.
Setting/ • The default setting is Desktop.
Procedure
(3) Line/Page
Functions • To set the number of lines per page for printing the text data.
Use • To change the number of lines per page for printing the text data.
Setting/ • The default setting is 60 or 64 lines.
Procedure
(4) Font Size
Functions • To set the font size when not specified by the printer driver during PC printing.
Use • To set the font size when it cannot be specified by the printer driver during printing
from Windows DOS, etc.
Setting/ • The default setting is
Procedure Scalable Font : 12.00 points
Bitmap Font
(5) CR/LF Mapping
Functions • To set the mode for replacing data when printing the text data.
Use • To change the mode for replacing data when printing the text data.
Mode 1 : Replacing CR with CR-LF
Mode 2 : Replacing LF with CR-LF
Mode 3 : Replacing with CR-LF
OFF
Setting/ • The default setting is OFF.
Procedure
C. PS Setting
(1) PS Error Print
Functions • To set whether to print or not the error information when an error occurred during PS
rasterizing.
Use • To print the information concerning the PostScript error.
Setting/ • The default setting is Disable.
Procedure
"60 or 64 lines" (5 to 128)
: 10.00 pitch
: Does not replace
Mode 1 Mode 2
Enable
14. User Setting
Mode 3 "OFF"
"Disable"
155