Replacing The Waste Toner Box - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006
6.5.9

Replacing the Waste Toner Box

[1]
[2]
[3]
1. Open the Front Door.
2. Press the Waste Toner Box release
lever [1].
4038F2C541DA
3. Remove the Waste Toner Box [2].
NOTE
• Raise the Waste Toner Box gently
before removing it.
• If scattered toner has accumulated
in the vicinity of the toner collecting
port, do not tilt the Waste Toner Box
when removing it.
• Do not leave the Waste Toner Box in
a tilted condition after removing it.
4038F2C542DA
4. Clean the surface around the waste
toner collecting port.
See P.30
5. Remove the Waste Toner Box from
its box, and remove the packing
material.
6. Set the Waste Toner Box [3] in place.
7. Close the Front Door.
NOTE
• Replace the Dust Filter/Cooling Fan
supplied with the Waste Toner Box
at the same time.
4038F2C543DA
6. Periodical check
29