Tray Setting - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006
14.2.4

Tray Setting

A. Auto Tray Select
Functions • To set the Tray for the Auto select when the Auto Paper function is set.
Use • To select the Tray for Auto Paper function.
Setting/ • The default setting is "T1 T2 T3 T4 BP."
Procedure
T1 (Tray1), T2 (Tray2), T3 (Tray3), T4 (Tray4), BP (Bypass Tray)
*T3 and T4 will be displayed only when they are mounted as options.
B. Tray Priority
Functions • To set the priority for switching Trays when the Auto Tray switch function is set.
Use • To set the priority of the Trays when the Auto Tray switch function is set.
Setting/ • The default setting is "T1 T2 T3 T4 BP."
Procedure
T1 (Tray1), T2 (Tray2), T3 (Tray3), T4 (Tray4), BP (Bypass Tray)
*Outputs the corresponding Tray by Auto select in listed order.
C. Auto Tray Select
Functions • To set whether to automatically switch to another Tray with same size paper when the
Paper Take-up Tray runs out of paper during printing.
Use • To switch the Paper Take-up Tray automatically.
Setting/ • The default setting is Prohibit.
Procedure
D. No Match Paper
Functions • To set whether to switch to another Tray automatically when the specified Tray runs
out of paper during printing.
Use
Stop Printing (Tray Fixed) : It stops printing when the specified Tray runs out of
Switch Trays (Tray Priority): To switch to another Tray with the specified paper and
Setting/ • The default setting is Stop Printing (Tray Fixed).
Procedure
"Stop Printing (Tray Fixed)"
"Permit"
paper.
print when the Tray is out of paper.
14. User Setting
Prohibit
Switch Trays (Tray Priority)
149