Konica Minolta bizhub C250P Service Manual page 284

Field Service Ver. 2.0 Mar. 2006
<SMTP port number>
Functions • To set the SMTP port number for transmission used for the CS Remote Care.
Use • To set the Port Number of the SMTP Server.
Setting/ • The default setting is 25.
Procedure
<SMTP Connection Time-out>
Functions • To set the timeout period for transmission.
Use • To change the timeout period for connection during transmission.
Setting/ • The default setting is 60 Sec.
Procedure
<Authentication Setting>
Functions • To set whether or not to authenticate during transmission via SMTP server.
Use • To use when authenticating during transmission.
Available authentication mode: POP Before SMTP, SMTP authentication
Setting/ • The default setting is OFF.
Procedure
* Setting to "POP Before SMTP" will set the time for POP Before SMTP.
• The default setting is 60 Sec.
* When setting to SMTP authentication, click the "Setting Check" key for authentication.
User ID
Password
Domain name : Enter the domain name for SMTP authentication.
<TX/RX Test>
Functions • To determine the correct transmission and reception using CS Remote Care.
Use • Use to determine the correct transmission and reception using CS Remote Care.
Setting/ • Press the Start key to let the machine start the transmission and reception test.
Procedure • The test procedure and result will be displayed on the screen.
<Data Initialization>
Functions • To initialize the contents for the sever setting.
Use • Use to initialize the contents for the server setting.
Setting/ • The default setting is No.
Procedure
"60 Sec" (30 to 300 Sec)
"OFF" POP Before SMTP
"60 Sec" (0 to 60 Sec)
: Enter the User ID for SMTP authentication.
: Enter the password for SMTP authentication.
Yes
"25" (1 to 65535)
SMTP Authentication
"No"
17. Jig Soft
243