Konica Minolta bizhub C250P Service Manual page 210

Field Service Ver. 2.0 Mar. 2006
2. IPP Auth.
Functions • To set the IPP Authentication.
Use IPP Auth. Set: To set whether or not to use the IPP Authentication setting.
Auth. System:
User Name:
Password:
realm:
Setting/ <IPP Auth. Set>
Procedure • The default setting is ON.
<Auth. System>
• The default setting is req-user-name.
<User Name>
• Enter the User Name. (up to 20 characters)
<Password>
• Enter the Password. (up to 20 characters)
<realm>
• Enter the realm. (up to 127 characters)
3. Accept IPP Job
Functions • To set whether or not to use the Accept IPP Job.
Use • To use the Accept IPP Job.
Setting/ • The default setting is ON.
Procedure
4. Support Info.
Functions • To set the Support Information.
Use • For the response setting to see if IPP transmission supports each function.
Setting/ <Print Job>
Procedure • Set ON or OFF
<Cancel Job>
• Set ON or OFF
<Acquire Job>
• Set ON or OFF
<Valid Job>
• Set ON or OFF
<Job Attributes>
• Set ON or OFF
<Printer Attrib.>
• Set ON or OFF
To change the Authentication system for IPP Authentication.
To set the user name when basic or digest is selected for the
authentication system
To set the password when basic or digest is selected for the
authentication system
To set the realm for identifying the Authentication setting.
"ON"
"req-user-name"
"ON"
OFF
basic digest
OFF
14. User Setting
169