Date/Time Input Mode; Date & Time Setting Mode Screen - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006 17. Jig Soft

17.4 Date/Time Input mode

• This mode is used to set time-of-day and date.
17.4.1 Date & Time Setting mode screen
4038F3E510DA
A. Date & Time Setting mode setting procedure
1. Call the Service Mode to the screen.
2. Press the following keys in this order.
Stop → 1 → 1 → 4 → 4 → Clear
3. Enter year, month, day, hour, and minute, in that order, from 10-key Pad.
(Year 4 digits → Month 2 digits → Day 2 digits → Hour 2 digits → Minute 2 digits)
NOTE
• When setting the month, day, hour, or minute, enter "0" first if the data one digit.
4. Make sure that correct figures have been entered and then click [Entry].
5. Click [END] to return to the Service Mode.
217