Field Service Ver. 2.0 Mar. 2006
18.3 Settings in the Enhanced Security
18.3.1
CE Password
Functions
• To set and change the CE Password.
Use
• Use to change the CE Password.
Setting/
• Enter the CE Password (8 digits) on the on-screen keyboard.
Procedure
• The initial setting is "92729272."
Current Password : Enter the currently using CE Password.
New Password
Re-Input Password : Enter the new CE Password again.
NOTE
• When the following setting leads to the Password Rules [ON], the password
with the same letters as well as the password which is same as the previous
one cannot be changed.
[Admin. Setting] → [Security Setting]
• NEVER forget the CE password. When forgetting the CE password, call
responsible person of KONICA MINOLTA.
18.3.2
Administrator Password
Functions
• To set and change the Administrator Password.
Use
• Use to change the Administrator Password.
Setting/
• Enter the Administrator Password (8 digits) on the on-screen keyboard.
Procedure
• The initial setting is "12345678."
New Password
Re-Input Password : Enter the new Administrator Password again.
NOTE
• When the following setting leads to the Password Rules [ON], the password
with the same letters, the password which is same as the previous one and the
password of less than eight digits cannot be changed.
[Admin. Setting] → [Security Setting]
18.3.3
CE Authentication
Functions
• To determine whether or not to authenticate CE Password as entering Service Mode.
Use
• Use when authenticating CE Password as entering Service Mode.
Setting/
• The default setting is OFF.
Procedure
18.3.4
IU Life Stop Setting
Functions
• To select whether or not to stop a print cycle when the IU reaches its service life.
Use
• Use to select not to stop the print cycle when the IU reaches its service life.
Setting/
The default setting is Stop.
Procedure
: Enter the new CE Password.
: Enter the new Administrator Password.
ON
"Stop"
18. Enhanced Security
"OFF"
No Stop
279