Konica Minolta bizhub C250P Service Manual page 206

Field Service Ver. 2.0 Mar. 2006
(4) v3 Setting
1. Context Name
Functions/ • To set the Context Name which is used for SNMP v3.
Use
Setting/ • Enter the Context Name. (up to 63 characters)
Procedure
2. Discovery Set
Functions • To set the Discovery Authority User which is used for SNMP v3.
Use Discovery User:
User Name:
Setting/ <Discovery User>
Procedure • The default setting is Enable.
<User Name>
• Enter the Discovery User Name. (up to 32 characters)
NOTE
• The User name same with the Read User Name or the Write User name cannot
be set.
3. Read Setting
Functions • To set the security level of the read-only User used for SNMP v3.
Use User Name:
Security Level:
Auth-Password:
Priv-Password:
Setting/ <User Name>
Procedure • Enter the Read User Name. (up to 32 characters)
1
NOTE
• The User Name same with the Discovery User Name cannot be used.
<Security Level>
• The default setting is Auth. & Priv.
<Auth-Password>
• Enter the Auth-Password. (up to 8 to 32 characters)
<Priv-Password>
• Enter the Priv-Password. (up to 8 to 32 characters)
To set whether or not to enable the Discovery Authority User
To set the Discovery Authority User name
"Enable"
To set the user name
To set the security level of the user
Auth. OFF: No authentication is made upon user access.
Auth.: Authentication is made only of the authentication password
upon user access.
Auth.&Priv.: Authentication is made of the authentication password and pri-
vacy password upon user access.
To set the authentication password
To set the privacy password
Auth. OFF Auth.
14. User Setting
Disable
"Auth. & Priv."
165