Misfeed Display Resetting Procedure; Sensor Layout - Konica Minolta bizhub C250P Service Manual

22. Jam Display

22.2 Misfeed Display Resetting Procedure

• Open the corresponding door, clear the sheet of paper misfeed, and close the door.

22.3 Sensor layout

• System Mounted with PC-203.
[1] Exit Sensor
[2] Duplex Unit Transport Sensor 1 PC1 DU
[3] Duplex Unit Transport Sensor 2 PC2 DU
[4]*1 Registration Roller Sensor
[4]*1 OHP Sensor
[5] Tray 2 Vertical Transport Sensor PC8-PC
*1: Two different types of sensors are located in the area near [4].
290
PC2 [6] Tray 2 Paper Take-Up Sensor
[7] Tray 3 Vertical Transport Sensor PC117-PC
[8] Tray 3 Take-up Sensor
PC1 [9] Tray 4 Vertical Transport Sensor PC126-PC
PC4 [10] Tray 4 Take-up Sensor
Field Service Ver. 2.0 Mar. 2006
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
4038F4C519DA
PC9-PC
PC116-PC
PC125-PC