Troubleshooting For Cs Remote Care - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006
Error code
3008 POP3_DELETE_FAIL_ERR
3009 POP3_MAILBOX_FULL
Not Ready
• Tried to transmit or receive an E-Mail when the
4103
machine was not yet in the E-Mail receiving
status after power was turned ON.
4104 SMTP Channel Not Ready
4105 POP3 Channel Not Ready
4106 Not Ready other than the ones listed above.
NOTE
• When a code other than the ones listed above is displayed, contact KONICA
MINOLTA and inform the error code.
17.8.10

Troubleshooting for CS Remote Care

If communication is not done properly during use of the modem, check the condition by fol-
lowing the procedures shown below.
• Is the Modem power ON?
• Is the phone line normally connected?
Error
17. Jig Soft
Solution
• Check the POP3 Server envi-
ronment on User's side.
• Check the POP3 Server envi-
ronment on User's side.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
• Wait for a while and try trans-
mitting again.
247