Misfeed At Tray 3 Feed And Tray 3 Vertical Transport Section (Pc-103/Pc203) - Konica Minolta bizhub C250P Service Manual

22. Jam Display
22.4.7

Misfeed at Tray 3 Feed and Tray 3 vertical transport section (PC-103/PC203)

A. Detection Timing
Type
Detection of The leading edge of the paper does not block the Tray 3 Vertical Transport Sensor
misfeed at Tray 3 (PC117-PC) even after the lapse of a given period of time after the Tray3 Take-up
feed or Vertical Motor (M122-PC) has been energized.
Transport Section
The Tray 2 Vertical Transport Sensor (PC8-PC) is not blocked even after the lapse
of a given period of time after the paper has blocked the Tray 3 Vertical Transport
Sensor (PC117-PC).
The Tray 3 Vertical Transport Sensor (PC117-PC) is not unblocked even after the
lapse of a given period of time after it has been blocked by the paper.
Tray 3 Vertical Rise timing of load for registration is earlier than the one for making the loop at
Transport section front of the Registration Roller at Tray 3 feed.
Loop Registration
Reversing JAM
Detection of paper The Tray 3 Vertical Transport Sensor (PC117-PC) is blocked when the Main
left in Tray 3 Power Switch is turned ON, a door or cover is opened and closed, or a misfeed or
malfunction is reset.
The Tray 3 Take-Up Sensor (PC116-PC) is blocked when the Main Power Switch
is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is
reset.
B. Action
Tray 3 Take-Up Sensor (PC116-PC)
Tray 3 Vertical Transport Sensor (PC117-PC)
Tray 2 Vertical Transport Sensor (PC8-PC)
Tray3 Take-up Motor (M122-PC)
Registration Roller Sensor (PC1)
Step
1 Initial check items
2 PC1 I/O check, Sensor check
3 PC116-PC I/O check, Sensor check
4 PC117-PC I/O check, Sensor check
5 PC8-PC I/O check, Sensor check
6 M122-PC operation check
7 Change PWB-C2 PC
8 Change PWB-M
298
Description
Relevant Electrical Parts
Control Board (PWB-C2 PC)
Mechanical Control Board (PWB-M)
Action
Field Service Ver. 2.0 Mar. 2006