Connecting The Jig Software To The Printer - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006
8.2.3

Connecting the Jig Software to the Printer

• Turn PC power ON. Turn the Printer power ON. Start the Jig Software (External panel
Controller.)
• When the error message is displayed during operation, follow the message for the coun-
termeasure.
• Do not finish the Jig Software while it is running. When the Jig Software is finished, start
the printer and the Jig Software again.
[2]
4. Turn on your PC and click the External Panel Controller icon.
[1]
4038F2E301AA
4038F2E302AA
4004D270AA
1. Turn Printer power ON while press-
ing the Menu/select key [1] on the
control panel.
• Keep pressing the Menu/select key
until the LED [2] on the control panel
turns OFF or "Please wait" is dis-
played.
2. Make sure that "Trouble Reset" is
displayed.
• When "Ready to print" is displayed,
turn power OFF and turn it ON again.
3. Make sure that the selector knob is
set to "A."
8. Service Jig
47