Konica Minolta bizhub C250P Service Manual page 204

Field Service Ver. 2.0 Mar. 2006
E. SMB (Server Message Block)
(1) WINS (Windows Internet Name Service)
1. WINS Setting
Functions • To set whether or not to enable the WINS setting.
Use • To use the WINS (Windows Internet Name Service) setting is necessary.
• By using the WINS, the traffic by broadcast can be reduced, and the communication
becomes available with the network where broadcast does not reach.
Setting/ • The default setting is ON.
Procedure
2. DNS Auto Obtain
Functions • To set whether or not to enable the Auto Obtaining of the WINS Server Address.
Use • To acquire the WINS Server Address automatically.
• To obtain the WINS Server Address from DHCP server. If there are more than on
address settings, up to two can be acquired.
Setting/ • The default setting is Enable.
Procedure
NOTE
• "Enable" cannot be set when [IP Address] is set to "Auto Input".
3. WINS Server IP 1, 2
Functions • To set the WINS Server Address.
Use • To use when manually entering the WINS Server Address.
• The Primary Address and the Secondary Address can be set.
(The primary Address has the priority during operation.)
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
1. Select "WINS Server IP 1" or "WINS Server IP 2."
2. Enter the WINS Server Address.
(2) Printer
1. Printer Setting
Functions • To set whether to use SMB port or not in Printer mode.
Use • Not to use SMB port in Printer mode.
Setting/ • The default setting is ON.
Procedure
2. NetBIOS Name
Functions • To set NetBIOS name.
Use • To set NetBIOS name.
Setting/ • Enter the NetBIOS name. (up to 15 characters)
Procedure
"ON"
"Enable"
"ON"
14. User Setting
OFF
Disable
OFF
163