Konica Minolta bizhub C250P Service Manual page 207

14. User Setting
4. Write Setting
Functions • To set the name of the Reading/Writing Authority User which is used for SNMP v3.
Use User Name:
Security Level:
Auth-Password:
Priv-Password:
Setting/ <User Name>
Procedure • Enter the Read User Name. (up to 32 characters)
1
NOTE
• The User Name same with the Discovery User Name cannot be used.
<Security Level>
• The default setting is Auth. & Priv.
<Auth-Password>
• Enter the Auth-Password. (up to 8 to 32 characters)
<Priv-Password>
• Enter the Priv-Password. (up to 8 to 32 characters)
166
To set the user name
To set the security level of the user
Auth. OFF: No authentication is made upon user access.
Auth.: Authentication is made only of the authentication password
upon user access.
Auth.&Priv.: Authentication is made of the authentication password and pri-
vacy password upon user access.
To set the authentication password
To set the privacy password
Auth. OFF Auth.
Field Service Ver. 2.0 Mar. 2006
"Auth. & Priv."