I/F Setting - Konica Minolta bizhub C250P Service Manual

14. User Setting
5. Printer Info.
Functions • To set the Printer information.
Use Printer Name:
Printer Location: To set the Printer Location.
Printer Info.:
Setting/ <Printer Name>
Procedure • Enter the Printer Name. (up to 127 characters)
<Printer Location>
• Enter the Printer Location. (up to 127 characters)
<Printer Info.>
• Enter the Printer Info. (up to 127 characters)
I. Disable Proof
Functions • To set how to process the Job when SSL Certificate becomes invalid.
Use
Setting/ • The default setting is Permit.
Procedure
J. Network Speed
Functions • To set the Network speed.
Use • To set the specific network speed.
Setting/ • The default setting is Auto.
Procedure
NOTE
• When Network speed setting is changed, turn off the Main Power Switch and
turn it on again more than 10 seconds after.
14.3.5

I/F Setting

A. Parallel Timeout
Functions • To set the timeout period for Parallel transmission.
Use • To make the timeout period longer according to the network condition.
Setting/ • The default settings are 60 sec.
Procedure
B. Network Timeout
Functions • To set the timeout period for Network transmission.
Use • To make the timeout period longer according to the network condition.
Setting/ • The default settings are 60 sec.
Procedure
170
To set the Printer Name.
To set the Printer Info.
"Permit"
"Auto" 10Mbps Full Duplex
100Mbps Full Duplex
"60 sec" (10 to 1000)
"60 sec" (10 to 1000)
Field Service Ver. 2.0 Mar. 2006
Prohibit
10Mbps Half Duplex
100Mbps Half Duplex