Image Controller; Unit Change; Lct Paper Size - Konica Minolta bizhub C250P Service Manual

Hide thumbs Also See for bizhub C250P:
Table of Contents

Advertisement

Field Service Ver. 2.0 Mar. 2006
16.3.6

Image Controller

Functions
• To set the type of the controller.
• "Peripheral Mode" appears when "Others" is selected.
Use
• When setting up the controller.
Setting/
Image Controller
Procedure
• Select the controller to be used.
"Controller 0"
Controller 1
Controller 2
Controller 3
Others
Peripheral Mode
• Select the operating mode of the other.
Mode 1: Not use
Mode 2: Not use
Mode 3: Not use
NOTE
• Do not change the setting.
16.3.7

Unit Change

Functions
• To select who is to replace a unit.
• When the unit life arrives, the warning display is intended for the specific person who
is going to replace the unit.
When "User" is selected
When "Service" is selected : Life warning.
Use
• Upon setup
Setting/
• The following are the default settings:
Procedure
Toner Cartridge
Imaging Unit
Waste Toner
Punch Dust Box
16.3.8

LCT Paper Size

Functions
• To set the paper size for the LCT
Use
• Use to change the paper size for the LCT.
Setting/
The default setting depends on the setting made for the applicable marketing area.
Procedure
: The standard controller is used.
: Not use
: Not use
: Not use
: Not use
: Printing is inhibited.
US, Japan, Others 4
: "User"
Service
: User
"Service"
: User
"Service"
: User
"Service"
"A4"
16. TECH. REP. MODE
Europe, Others 1/2/3
"User"
Service
"User"
Service
"User"
Service
"User"
Service
8 1/2 × 11
187

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents