Connecting The Machine To A Computer; Connecting To A Wired (Ethernet) Network - Konica Minolta bizhub C3100i Quick Manual

3
3.3

Connecting the Machine to a Computer

The machine can connect with wired network, USB, and wireless network connections. After connecting, in-
stall print driver and other necessary software.
3.3.1

Connecting to a Wired (Ethernet) Network

Tips
- Use a LAN cable that is category-5 or greater.
1
Press the
2
Press the + or , button, select [Network Settings], and press the
3
Press the + or , button, select [Network], and press the
4
If [Wi-Fi] is selected, press the + or , button, select [Ethernet], and press the
% If [Ethernet] is selected, proceed to step 6.
5
If a confirmation screen appears, turn off the machine, and then turn it on again.
6
Insert the network cable into the machine's Ethernet port.
7
Connect a hub or other network device to the other network cable port.
8
Set the IP address for the machine.
d
Reference
For details on how to configure IP addresses, refer to page 3-14.
3-8
<Menu> button.
Connecting the Machine to a Computer
button.
button.
3.3
button.
bizhub C3100i