Konica Minolta bizhub C250P Service Manual page 109

10. Firmware upgrade
C. Forwarding Access Setting
• To make the access setting for the Program Server which stores the Firmware data.
1. Start the Jig software and select [Service Mode] → [Internet ISW].
2. Click [Forwarding Access Setting].
3. Select [User ID], and enter the user ID which is necessary for connecting to the Pro-
gram Server on the on-screen keyboard, and click [END].
4. Select [Password], and enter the Password which is necessary for connecting to the
Program Server on the on-screen keyboard, and click [END].
5. Select [URL], and enter the directory which stores the Program Server Address and the
Firmware on the on-screen keyboard by URL method, and click [END].
NOTE
• Enter the URL which matches to the Protocol to be used.
When connecting to http
When connecting to ftp
6. Select [File Name], and enter the file name of the Firmware data to be downloaded on
the on-screen keyboard, and click [END].
7. Click [END] to finish setting.
68
http://(host name or IP address)/directory name
or https://(host name or IP address)/directory name
ftp://(host name or IP address)/directory name
Field Service Ver. 2.0 Mar. 2006
4037F2E622DA