Konica Minolta bizhub C250P Service Manual page 193

14. User Setting
(9) Org. Direction
Functions • To set the default setting for the direction of the original during PC printing.
Use
Setting/ • The default setting is Portrait.
Procedure
(10) Spool Setting
Functions • To set whether to store the print data to HDD when receiving the next job during Rip
process of the current job.
Use
Setting/ • The default setting is ON.
Procedure
(11) Size Change
Functions • To set whether to switch between A4 and Letter size paper, and A3 and Ledger size
paper in reading.
Use • To output Letter size document to A4 size, and Ledger size document to A3 size.
• To output A4 size document to Letter size, and A3 size document to Ledger size.
NOTE
• When switching the size, the image will be printed in the same magnification.
• The image will not be reduced when there is image deficiency.
Setting/ • The default setting is OFF.
Procedure
(12) Banner Setting
1
• Banner Page: Page that contains the sender and subject of a print job
<Typical printout>
Job
Sender
Title
Interface
Language
Date
Functions • To set whether to enable or disable banner printing.
Use • When banner printing is to be performed.
Setting/ • The default setting is OFF.
Procedure
152
"Portrait"
"ON"
ON
Banner Page
0200
Admin
Microsoft word - banner.doc
Parallel
PCLXL
9:55:00 FEB 1 2006
ON
Field Service Ver. 2.0 Mar. 2006
Landscape
OFF
"OFF"
P1
2006/02/01 10:00
Serial No. 02000001
TC: 10000
4037F3E430AA
"OFF"