Field Service Ver. 2.0 Mar. 2006
23.5.46
C4551: Laser malfunction (Cyan)
23.5.47
C4552: Laser malfunction (Magenta)
23.5.48
C4553: Laser malfunction (Yellow)
23.5.49
C4554: Laser malfunction (Black)
PH Unit
Step
1
Check the connector for proper connection and correct as necessary.
2
Change PH Unit
3
Change PWB-D
4
Change PWB-M
23.5.50
C4705: Image Output Time Out
MFP Control Board (PWB-MFP)
Step
Select [Service Mode] → [State Confirmation] → [Memory/HDD Adj.] → [Memory Bus Check]
1
→ [Memory→PRT] of the Jig software.
2
Check the connectors on PWB-MFP for proper connection and correct as necessary.
3
Change PWB-MFP
Relevant Electrical Parts
PH Interface Board (PWB-D)
Mechanical Control Board (PWB-M)
Action
Relevant Electrical Parts
Action
23. Malfunction code
333