Data Capture - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006
16.3.14

Data Capture

1
Functions • When an error occurs, it acquires the print job data in order to analyze the cause of
the error.
Use • When an error occurs, this will be used to analyze the cause of the error according to
the print job data.
Setting/ NOTE
• The following conditions are necessary for this function.
Procedure
When selecting [Data Capture] in Admin. Setting, "Permit" must be set.
• The hard disk must be mounted to the machine.
1. Select [Admin. Setting] → [Data Capture]. Select "ON."
(While the Data Capture setting is "ON", the print job data from the PC will be stored
in the hard disk.)
2. Check the IP address of the machine.
3. Connect the PC (Windows) and the machine with Ethernet cable.
4. Start the DOS command prompt of the PC, and specify the IP address of the
machine.
5. Input the user name and the password.
User name: capture
Password: sysadm
16. TECH. REP. MODE
4037F3E538DA
4037F3E539DA
191