Konica Minolta bizhub C250P Service Manual page 282

Field Service Ver. 2.0 Mar. 2006
(7) AT Command
Functions • To set the command to be issued at the time of Modem Initialization.
• This setting is available only when [Modem] is selected for the system setting.
Use • To set the command to be issued at the time of Modem Initialization.
Setting/
• Enter the command and click [SET] to register.
Procedure
D. Server Setting
1
• Server Setting can be set only when [E-Mail] is selected by System Setting.
(1) Server for RX
<POP3 server>
Functions • To set the POP3 server address used for the CS Remote Care.
Use • To set the address of the POP3 Server.
• POP3 server address can be set with IP address or the domain name.
Setting/ <Input IP Address>
Procedure • IP Address Version 4 format
[0 to 255].[0 to 255].[0 to 255].[0 to 255]
<Input FQDN>
• Enter the domain name.
<POP3 login name>
Functions • To set the logon name for the POP3 server used for the CS Remote Care.
Use • To set the logon name for the POP3 server.
Setting/ • The default setting is No.
Procedure • Up to 64 characters (alphanumeric characters and symbols) can be used.
<POP3 password>
Functions • To set the logon password for the POP3 server used for the CS Remote Care.
Use • To set the logon password for the POP3 server.
Setting/ • The default setting is No.
Procedure • Up to 15 characters (alphanumeric characters and symbols) can be used.
<POP3 port number>
Functions • To set the POP3 port number used for the CS Remote Care.
Use • To set the port number for the POP3 server.
Setting/ • The default setting is 110.
Procedure
"110" (1 to 65535)
17. Jig Soft
241