Konica Minolta bizhub C250P Service Manual page 51

5. Image creation process
Transfer Belt
[11]
Cleaning
[12] PC Drum Cleaning • The residual toner left on the surface of the PC Drum is scraped off.
[13] Main Erase
10
• A charge is applied to the Transfer Belt. By potential difference, residual
toner on the surface of the Transfer Belt is collected for cleaning.
• The surface of the PC Drum is irradiated with light, which neutralizes any
surface potential remaining on the surface of the PC Drum.
Field Service Ver. 2.0 Mar. 2006