17. Jig Soft
17.16 Internet ISW
• By using this setting, the Firmware stored in the Server can be downloaded over internet
for upgrading.
• When performing Internet ISW from the control panel of the machine, settings must be
made in advance on the Jig software side.
• For details for upgrading the Firmware, refer to "Firmware upgrade" in the Maintenance
section.
See P.64
17.16.1
Internet ISW Set
1
Functions
• To set whether or not to enable each setting for Internet ISW.
Use
• To use when upgrading the Firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to "ON".
Setting/
• The default setting is OFF.
Procedure
274
ON
Field Service Ver. 2.0 Mar. 2006
"OFF"