Connecting To A Local Area Network (Lan); Connecting A Network Cable; Leds On The Network Port - Konica Minolta bizhub 225i User Manual

2
2.2

Connecting to a local area network (LAN)

This machine establishes LAN connection using the TCP/IP protocols. Thus, it requires to connect this ma-
chine to the LAN using the network cable.
2.2.1

Connecting a network cable

Insert one connector of a network cable into the network port (LAN) on the left side of the main unit, and insert
the other connector into an available port on the network hub.
Tips
Use a network cable rated at category 5, 5E, or higher. Note that a network cable is not supplied together
with this machine.

LEDs on the network port

Item
LED1 (LINK)
LED2 (ACT)
2-4
LED1
LED2
Description
This LED lights up when the network cable is correctly connected. If this LED does
not light up even though you have correctly connected the cable, check the connec-
tion. If this LED does not light up even though the both ends of the network cable
are correctly connected, the cable may have been broken.
This LED flashes during data transmission or reception.
Connecting to a local area network (LAN) 2.2
bizhub 225i