Konica Minolta bizhub C250P Service Manual page 249

16. TECH. REP. MODE
(3) Send Setting
<SMTP server>
1
Functions • To set the SMTP sever address for transmission used for the CS Remote Care.
Use • To set the SMTP server address
Setting/ <Input IP Address>
Procedure • IP Address Version 4 format
[0 to 255].[0 to 255].[0 to 255].[0 to 255]
<SMTP port number>
Functions • To set the SMTP port number for transmission used for the CS Remote Care.
Use • To set the Port Number of the SMTP Server.
Setting/ • The default setting is 25.
Procedure
<SMTP Connect Timeout>
Functions • To set the timeout period for transmission.
Use • To change the timeout period for connection during transmission.
Setting/ • The default setting is 60 Sec.
Procedure
<Auth. Setting>
1
Functions • To set whether or not to authenticate during transmission via SMTP server.
Use • To use when authenticating during transmission.
Available authentication mode: POP Before SMTP, SMTP
Setting/ • The default setting is OFF.
Procedure
* Setting to "POP Before SMTP" will set the time for POP Before SMTP.
• The default setting is 60 Sec.
(4) TX/RX Test
Functions • To determine the correct transmission and reception using CS Remote Care.
Use • Use to determine the correct transmission and reception using CS Remote Care.
Setting/ • Press the Start key to let the machine start the transmission and reception test.
Procedure • The test procedure and result will be displayed on the screen.
(5) Data Initialize
Functions • To initialize the contents for the sever setting.
Use • Use to initialize the contents for the server setting.
Setting/ • The default setting is No.
Procedure
208
"60 Sec" (30 to 300 Sec)
"OFF" POP Before SMTP
"60 Sec" (0 to 60 Sec)
Yes
Field Service Ver. 2.0 Mar. 2006
"25" (1 to 65535)
SMTP
"No"