Konica Minolta bizhub C250P Service Manual page 80

Field Service Ver. 2.0 Mar. 2006
[6]
4038F2C537DA
[7]
4038F2C567DA
6. Periodical check
6. Pull out the PC Drum protective
sheet [6] while pressing the Imaging
Unit.
7. Insert the Imaging Unit all the way.
NOTE
• Make sure that the Imaging Unit is
inserted all the way.
8. Close the Front Door.
9. Plug in the power cord.
10. Turn ON the Main Power Switch.
11. Select [Service Mode] → [Imaging
Process Adjustment] → [X-Rite Cali-
bration (Gradation Adjust)] of the Jig
software and carry out Gradation
Adjust.
NOTE
• When removing / installing the
Imaging Unit, use care not to touch
the surface of the PC Drum [7].
39