Counter; Procedure; Life; Jam - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006

17.11 Counter

• The Counter displays the counts of various counters to allow the Technical Representa-
tive to check or set as necessary.
17.11.1

Procedure

1. Click [Counter] to show the Counter menu.
2. Select the specific counter to be displayed.
3. To clear the counts of two or more counters within a group or across different groups at
once, click [Counter Reset], select the specific counters to be cleared, and click [END].
Two or more counters can be selected.
17.11.2

Life

Functions • To check the number of hours or times each of the different maintenance parts has
been used.
• To clear the count of each counter.
Use • When each of the maintenance parts is replaced.
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
• It is not possible to clear the count of the counters for the Fusing Unit, Transfer Belt
Unit, and IU, which are provided with a new unit detection function.
<1>
• Fusing Unit
• Transfer Roller Unit
• Image Transfer Belt Unit
• Paper dust remover/Ozone Filter : Number of times a sheet of paper is fed through
• 1st.
• 2nd.
• 3rd.
• 4th.
• Manual Tray
<2>
• Cyan IU
• Magenta IU
• Yellow IU
• Black IU
• LCT Parts
• ADF Feed
• ADF Reverse : Not used.
• Sorter/Finisher: Number of sheets of paper fed out of the Sorter/Finisher
17.11.3

Jam

Functions • To check the number of misfeeds that have occurred at different locations in the
machine.
• To clear the count of each counter.
Use • To check the number of paper misfeeds that have occurred
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
: Number of times a sheet of paper is fed through
: Number of times a sheet of paper is fed through
: Number of times a sheet of paper is fed through
: Number of sheets of paper fed from Tray 1
: Number of sheets of paper fed from Tray 2
: Number of sheets of paper fed from Tray 3
: Number of sheets of paper fed from Tray 4
: Number of sheets of paper fed from the Bypass
: Period of time over which the Cyan Developing Unit has been used.
: Period of time over which the Magenta Developing Unit has been
used.
: Period of time over which the Yellow Developing Unit has been used.
: Period of time over which the Black Developing Unit has been used.
: Number of sheets of paper fed from the LCT
: Not Used.
17. Jig Soft
255