Field Service Ver. 2.0 Mar. 2006
B. HDD Setting
(1) HDD Password
Functions
• To set the Lock Password for the hard disk.
Use
• To enter the Lock Password for the hard disk.
Setting/
• Enter the password (up to 8 on-byte characters)
Procedure
• Reenter the password to confirm, turn main power switch OFF and ON again.
NOTE
• Double-byte and identical characters are not acceptable.
1. Password
2. New Password
3. Retype Password
4. Turn off the Main Power Switch and turn it on again more than 10 seconds after.
(2) HDD Formatting
Functions
• To format the hard disk
• The function proceeds in the order of Physical Format to Logical Format.
• If the hard disk is yet to be formatted, the trouble code "C-D010" will appear. Ignore
this code and continue with the formatting procedure.
Use
• When the hard disk is mounted.
• When the hard disk is to be initialized. (Physical Format to Logical Format)
Adjustment
1. Press the Menu/Setting key to display the Format OK? screen.
Procedure
2. Press the Menu/Setting key to format the hard disk.
3. Turn off the Main Power Switch and turn it on again more than 10 seconds after.
: Enter the current HDD Lock password
: Enter the new HDD Lock password to be used
: Reenter the new HDD Lock password
14. User Setting
173