Control/Display Mode [1] - Canon NP6330 Service Manual

CHAPTER 11 TROUBLESHOOTING
D. Control/Display Mode [1]
To start control/display mode, press '1' (keypad) and the OK key in sequence.
To select an item, press the number (keypad) and the OK key in sequence.
To delete an item, press the Clear key.
• A press on the Copy Start key while the service mode description is being
shown starts copying operation.
No.
101 Indicates the version of the master ROM
(IC116).
102 Indicates the version of the slave ROM
(IC104).
103 Indicates the version of the ROM of the DF.
104 Indicates the version of the ROM of the
sorter.
105 Indicates the version of the ROM of the
pedestal.
106 Indicates the surface temperature of the
upper fixing roller (output of thermistor
TH1).
107 Indicates the output of the AE sensor.
108 Indicates the activation voltage of the
scanning lamp.(220 / 240 V model)
109 Indicates the jam history.
• No. 101 ~ 105 ROM Version No. indicator
Turn on the indicators on the indication section one by one until the ROM version No.
is indicated. The hundreds and tens digits indicate the program version. Also the tens
units digits indicate the revision No.
Example ; ROM version : 2.01
11-132
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Description
Program version
Revision No.
ROM parts revision number
(See below)
Same as above
Same as above
Same as above
Same as above
unit: °C
0 to 255
unit: V
See p. 11-133
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks