Service Parts Disassembly
REP 8.5 Waste Toner Bottle Full Sensor/ Waste Toner Bottle Position
Sensor
PL8.2.3/ PL8.2.4
8-74
1. Remove the Waste Cartridge (REP 1.3,
2. Remove the Right Cover (REP 19.8,
3. Disconnect the wiring harness connectors that are connected to the 2 sensors.
4. Remove 2 screws (silver, Tapped, 8mm) that secure the Sensor Bracket
Assembly and remove the Sensor Bracket Assembly.
5. Release the hooks that secure the sensors and remove the sensors.
Waste Toner Bottle
Full Sensor
page
8-12).
page
8-219).
Waste Toner Bottle
Position Sensor
Phaser 7500 Printer Service Manual
s7500-127