Rep 4.17 Main Drive Unit - Xerox B210 Service Manual

REP 4.17 Main Drive Unit

Parts List on PL 4.6
Removal
1. Switch off the machine, then disconnect the power cord.
2. Remove the Left Side Cover, REP
3. Remove five screws, then remove the Main Drive Unit, move the Fuser Drive Locking
Lever to the unlock position (right), then remove the Main Drive Unit,
Screws
Locking Lever
Figure 1 Main Drive Unit Removal
Repairs - Adjustments
REP 4.17
2.2.
Figure
Replacement
1. Place the Front Cover Support Arm on the Stop Bracket,
Support Arm
1.
2. Install the Main Drive Unit, Figure 1
NOTE: Make sure the two tabs on the locking lever are inside the frame cutouts before
moving the fuser drive locking lever to the lock position.
July 2019
4-40
Figure
Figure 2 Front Cover Support Arm Placement
2.
Initial Release
Xerox® B210 Service Manual